Aircraftscales.com a division of Jackson Aircraft Weighing Systems LLC provides Aircraft scales, Aircraft Weighing Equipment, Helicopter Scales and Large Jet Under Axle Weighing Systems for all your aircraft weighing needs.
Making Aircraft scales, helicopter scales, and aircraft weighing equipment easy to use, cost positive to own and highly reliable for the aviation and aerospace industry since 1993.
Three 100,000lb cell transducers, one inch mounting, 300,000lbs total system capacity, digital indication.
M2000 Features: Units conversion: lbs/kg Resolution: +/- 520000 A/D internal counts Sampling rate: 100 times a second per channel Span stability: 2ppm/deg C Zero Stability: 5nV/deg C Linearity correction: 10 span entries Calibration Method: calibration through software stored in flash memory Calibration Sealing: physical seal or Class1 Audit Trail system, password protected Tare: Keyboard and scale tare, multiple tare id's can be stored in memory Time and Date: Y2K compliant time/date clock, internal battery backup Power On: selectable on/off switch
Analog Output: optional 4-20mA board via Smart Wire Serial Output: 2 full duplex RS232/RS422 ports IO Interface: peripheral expansion through Smart Wire multi drop RS485 port External IO: up to 6 channel setpoint via Smart Wire Baud Rate: 150-32,400 bps, selectable Display: Size: 6 digit, 7 segment 1" red LED Filtering: Fast Step quick response algorithm adjustable filter
Modes: display from CH1, CH2, CH3, Scan, and total of all channels.
Electrical: Power Requirements: 110VAC 12VDC 1A TemperatureRange: -10deg C to + 40deg C Setpoints: 6 programmable setpoints per channel Sense Amplifier: differential amplifier with 4 and 6 wire RFI Protection: filtered signal, excitation and sense lines Approvals: Canada: Class III/IIIHD 10000 USA: NTEP Class III/IIIl 10000 OIML: Pending NIST traceable certification to calibration master. One year warranty on parts and labor, calibration on sale.10% charge on returned sets for inspection, certification, calibration checks and restocking. Cell Specifications: ·Machined from steel to receive aircraft jack pads ·Calibrated to customer specifications ·Capacities are available in 5,000, 10,000, 15,000, 25,000, 30,000, 50,000 and 100,000lb cells ·Accuracy: 1/10th of 1% ·One inch mounting on standard aircraft jacks ·Additional adapter mountings are available as an option (see below)