Aircraftscales.com a division of Jackson Aircraft Weighing Systems LLC provides Aircraft scales, Aircraft Weighing Equipment, Helicopter Scales and Large Jet Under Axle Weighing Systems.


M2000-3-100CS     Quote: Call or email us
561-281-6179 or sales@aircraftscales.com
Three 100,000lb cell transducers, one inch mounting, 300,000lbs total system capacity, digital indication.

M2000 Features:


Units conversion: lbs/kg
Resolution: +/- 520000 A/D internal counts
Sampling rate: 100 times a second per channel
Span stability: 2ppm/deg C
Zero Stability: 5nV/deg C
Linearity correction: 10 span entries
Calibration Method: calibration through software stored in flash memory
Calibration Sealing: physical seal or Class1 Audit Trail system, password protected
Tare: Keyboard and scale tare, multiple tare id's can be stored in memory
Time and Date: Y2K compliant time/date clock, internal battery backup
Power On: selectable on/off switch

Communications:

Analog Output: optional 4-20mA board via Smart Wire
Serial Output: 2 full duplex RS232/RS422 ports
IO Interface: peripheral expansion through Smart Wire multi drop RS485 port
External IO: up to 6 channel setpoint via Smart Wire
Baud Rate: 150-32,400 bps, selectable
Display:
Size: 6 digit, 7 segment 1" red LED
Filtering: Fast Step quick response algorithm adjustable filter

Modes: display from CH1, CH2, CH3, Scan, and total of all channels.

 Electrical:
Power Requirements: 110VAC 12VDC 1A
Temperature Range: -10deg C to + 40deg C
Setpoints: 6 programmable setpoints per channel
Sense Amplifier: differential amplifier with 4 and 6 wire
RFI Protection: filtered signal, excitation and sense lines
Approvals:
Canada: Class III/IIIHD 10000
USA: NTEP Class III/IIIl 10000
OIML: Pending
NIST traceable certification to calibration master.
One year warranty on parts and labor, calibration on sale.  10% charge on returned sets for inspection, certification, calibration checks and restocking.
Cell Specifications:
·         Machined from stainless steel to receive aircraft jack pads
·         Calibrated to customer specifications
·         Capacities are available in 5,000, 10,000, 15,000, 25,000, 30,000, 50,000 and 100,000lb cells
·         Accuracy: 1/10th of 1%
·         One inch mounting on standard aircraft jacks
·         Additional adapter mountings are available as an option (see below)

Contact Larry Jackson for infromation and ordering at: larryjackson@jawsscales.com  561-281-6179